MB Quart Marine Powersports Nautic 2 Channel 400 Watt Class D Amplifier, Black

Bring the concert to the water with the MB Quart Marine Powersports Nautic 2-Channel 400-Watt Class D Amplifier. This powerful, versatile amp is built to IPX standards to resist water while delivering crisp, clear audio.

Durable and well-built, the amplifier resists extreme weather and salt spray, letting you enjoy quality audio out on the water. A low-noise preamplifier circuit maximizes power at low voltage to produce clear music audio with minimal distortion. With a signal-to-noise ratio of less than 90dB, you can listen to your favorite tunes without interruption in quality. Prewired inputs connect via RCA-nickel plated terminals that are high temperature and impact protected to provide secure connections. The PWM MOSFET power supply provides stable power through PC board with minimal heat generation and the aluminum heatsink dissipates heat quickly to allow the amp to run on lower impedance for a longer duration.

With 2 audio channels and a maximum power of 400 watts, this audio receiver gives you quality audio wherever you go. Enjoy your favorite tunes out on the water no matter whether using the Nautic Marine 2-Channel Waterproof Amplifier by MB Quart.

• 2-channel waterproof boat sound amplifier with marine-specific connectors built to withstand extreme weather and salt spray
• Features 400-watt maximum power output and RMS power of 2 x 200 watts at 2 ohms and 2 x 100 watts at 4 ohms
• IPX standard for water-resisting so you can confidently enjoy all of your music while on the water
• Low-noise preamplifier circuit maximizes power at low voltage without creating distortion, producing only quality music audio
• 2-channel operation with a flexible installation that allows for 2-channel or bridged mono mode
• RCA-nickel plated are high temperature and impact protected to provide secure connections
• Switched full, LPF, and HPF crossover with complete control over amplifier signal
• PWM MOSFET power supply provides stable power through PC board with minimal heat generation
• Aluminum heatsink dissipates heat quickly to allow the amp to run on lower impedance for a longer duration
• Simpatico coil design with PWM power supply keeps voltage constant through Ultra-Fi output devices
• Quick disconnect wires and RCA connections for quick removal during the off-season
• Includes monitor thermal, overload, DC, and speaker short protection with lighted indicators for added safety
• Amp class: D
• Total channels: 2 channels
• Power: 400 watts
• Power at 2 ohms: 2 x 200 watts
• Power at 4 ohms: 2 x 100
• Crossover: Electronic
• Variable low pass crossover at 12dB per octave: 300Hz
• Bass boost: 0 to 12dB at 45Hz
• Subsonic filter: 60Hz
• Variable voltage: 0.2 to 9 volts
• Signal to noise: > 90dB
• Frequency response: 20Hz to 20k Hz
• Speaker level audio inputs: RCA
• Amplifier power terminal 12v/GND: Molex 10 GA
• Amp/Speaker terminal wire gauge: Molex plug connector
• Amplifier fusing: 30 amps x 1
• Color: Black
• Dimensions (L x W x H): 4 x 3 x 2 inches
• Weight: 2.12 pounds
• Manufacturer's warranty: 1-year warranty