Multi-Purpose Transistor Tester Diode Triode Capacitance Resistor Meter MOS/PNP/NPN SMD Test Multimeter

This meter is a small tool for the engineer, electronic maintenance and factory.It is very easy to test plug-in and SMD devices, it can also test different kinds of diodes, triodes, thyristors, MOSFET,enable to analysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.The multimeter has a high accuracy, precision and accurate measurement.It's small and handheldNotes:Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuitIf using power supply, please choose 9V - 12V adapter (including 9V and 12V)It is powered by 1pcs of 9V 6LR61 battery, when the battery power is under 6V, please replace it with a new .Parameters:Resistor: 0 - 50M ohm Resolution: 0.01 ohmCapacitor: 25pF - 100mF Resolution: 1pFInductor: 0.01mH - 20H Resolution: 0.01mHCapacitor ESR: 2uF-50mF Resolution: 0.01 ohmHow to use instructions:Push "POWER / TEST" to power on and start a test, multiple measurements can be repeated by this key, auto power off 20 seconds after measurementProvide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connectedThere is a table "typical ESR value of electrolytic capacitor" at the back, it is for guiding only, these are typical value for standard grade electrolytic capacitor at room temperatureCalibration:Short the test pin 1, 2, 3 together and push "POWER / TEST" button, then the screen prompts to enter calibration, push the button again within 2 seconds to confirm.Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finishPackage Weight: 0.25 kg.Package Size(L x W x H): 17.50 x 10.00 x 6.00 cm / 6.89 x 3.94 x 2.36 .Package Contents:1 x ESR02 PRO Digital Transistor Tester1 x English User Manual(not including other display items)1. Due to measurement, please allow an error of 1-3 cm.2. Due to different computer screens and monitors, the actual color may be slightly different from the picture.Thank you for your understanding!High-definition backlight display: high-definition backlight easy to deal

• This meter is a small tool for the engineer, electronic maintenance and factory.
• It is very easy to test plug-in and SMD devices, it can also test different kinds of diodes, triodes, thyristors, MOSFET,
• enable to analysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.
• The multimeter has a high accuracy, precision and accurate measurement.
• It's small and handheld
• Power on that is measured: gear automatic jump, voltage, AC voltage, on-off, resistance power on that is measured