Tripp Lite mSATA SSD to 2.5 in. SATA Enclosure Adapter Converter

The Tripp Lite P960-001-MSATA is a simple way to install an mSATA solid state drive in any device that expects a standard 2.5 in. SATA drive. By placing the mSATA board inside the included enclosure, you can drop the assembly into a laptop, desktop, server bay, or external dock just as you would with a regular 2.5 in. SSD or hard drive.

Installation takes only a few minutes. Remove the metal cover, seat the mSATA card in the internal connector, secure it with the supplied screws, then close the cover. The kit even ships with a small screwdriver, so you do not have to hunt for tools. Once the enclosure is in place, your system sees a full-size SATA drive and boots or transfers data with no drivers or external power required.

Because the adapter supports SATA I, II, and III, you get transfer speeds up to 6 Gbps, letting a modern mSATA SSD perform at its peak. The metal housing shields the drive against everyday knocks and helps it survive the repeated insertions common in hot-swap racks or USB docking stations.

This adapter is a practical choice for technicians who clone drives, creators who shuttle large project files between machines, or anyone breathing new life into an older computer that only accepts 2.5 in. SATA drives. It also works well in lab environments where you need to test multiple mSATA modules without opening a chassis each time.

Compliance with RoHS standards keeps hazardous materials out of your hardware stack, and the plug-and-play design means you spend less time on setup and more time moving data.

• Converts an mSATA SSD into a 2.5 in. SATA drive
• Accepts SATA I, II, and III devices with speeds up to 6 Gbps
• Protective enclosed housing stands up to frequent handling
• Works immediately on most operating systems without software
• Compatible with USB-enabled SATA docking stations and hot-swap bays
• Includes mounting screws and a screwdriver for quick assembly
• Meets RoHS environmental standards